A60 corrugated fire wall (SB-WA60-1), Equivalent Class A Divisions
fire Protection - Partitions & outfits
Equivalent Class A Divisions
SEBO TECH CO., LTD., Busan, Republic of Korea
Busan, Republic Of Korea
A60 corrugated fire wall (SB-WA60-1)
Product Description
"A60 corrugated fire wall (SB-WA60-1)"
composed of a minimum 1.5 mm thick stainless steel 316L plate insulated from one side with two layers of 50 mm thick "FireMaster Marine Plus Blanket" , with nominal density of 48 kg/m3, (manufactured by Morgan Thermal Ceramics). The corrugations are to be filled with the same insulation as above.
The joints between adjacent blankets shall be offset in each layer by approximately 300 mm and no less than 150 mm. The blankets are installed by means of stainless steel pins, Ø= 3 mm welded to the fire wall and 38 mm friction-fit washers. The pins are to be installed with a maximum spacing of 300 mm.
For further details, see drawing and test report listed under Type Approval documentation below.
Product Ratings
Not Available / To be Updated
Applicable Standards
Not Available / To be Updated