H120/H60 Corrugated Steel Fire Wall, Class H Partitions and Decks
fire Protection - Partitions & outfits
Class H Partitions and Decks
H120/H60 Corrugated Steel Fire Wall
Product Description
H-120 / H-60 Corrugated Steel Wall,
composed of 2 mm corrugated steel wall insulated on one side with FireMaster Marine Plus Blankets (density 70 kg/m3), thickness 110 mm (one layer 50 mm and one layer 60 mm) in between and over the corrugations, and with 150 mm (3 layers of 50 mm blanket) inside corrugation.
The joints between blankets in each layer shall be arranged so that they should not coincide to the same location and are therefore offset by up to approximately half a blanket width. The nominal blanket width is 610 mm and is to be compressed to a width of 580 mm to ensure compression at joints.
The blankets are held in place by steel pins (Ø3 mm / 125 - 285 mm long) welded to the wall and Ø38 mm friction-fit stainless steel washers.
For further details see drawing mentioned under Type Approval documentation below.
Product Ratings
Not Available / To be Updated
Applicable Standards
Not Available / To be Updated