30 minute HSC Aluminium Bulkhead 2 mm - FireMaster Marine Pl…

fire Protection - Partitions & outfits

Fire Rated Bulkheads, Ceiling, Panels and Decks

30 minute HSC Aluminium Bulkhead 2 mm - FireMaster Marine Plus Blanket

Product Description

30 minute HSC Aluminium Bulkhead 2 mm - FireMaster Marine Plus Blanket, composed of a 2 mm thick aluminium bulkhead horizontally stiffened on the exposed side by 25 mm wide x 38 mm deep x 3 mm thick angle stiffeners spaced at 130 mm. The bulkhead is additionally reinforced by vertical aluminium I-section beams, 80 mm wide x 8 mm thick flanges and 215 mm high x 8 mm thick web, located (welded) across to the stiffeners and spaced at 1200 mm.
The bulkhead is insulated on the exposed side with a layer of 35 mm thick FireMaster Marine Plus Blanket (density 70 kg/m3) applied across the stiffeners, keeping a 38 mm air gap between the bulkhead and the blanket. The I-section beams are insulated around with a layer of 35 mm thick FireMaster Marine Plus Blanket (density 70 kg/m3) with air gap on both sides of the web (box insulation).
The nominal blanket width is 610 mm and is to be compressed to a width of 580 mm to ensure compression at joints.
The blankets are held in place using bi-metallic pins (Ø 3 mm / typically 50 & 90 mm long) welded to the angle stiffeners and 38 mm friction washers. The pins are to be installed with a maximal spacing of 300 mm, whereas pins at the joints shall have a nominal spacing of 100 mm.
The installation is to be performed according to the manufacturers Fire Protection Systems Information, reference No. FM-MS 02 PW and No. FM 4.66.

Product Ratings

Not Available / To be Updated

Applicable Standards

Not Available / To be Updated