EP-116 (1x50 m) / UP-204 (1x30 m) / UP-100 (1x1200 m) / No.5…

Cathodic Protection & Protective Coating

Anticorrosive Marine Coatings

EP-116 (1x50 m) / UP-204 (1x30 m) / UP-100 (1x1200 m) / No.54HB (1x60 m)

Product Description

EP-116 (1x50 µm) / UP-204 (1x30 µm) / UP-100 (1x1200 µm) / No.54HB (1x60 µm)
Description of the Coating system, tested on bare steel;
— EP-116 Epoxy Multi-Purpose Primer
— UP-204 Water Base Primer for Polyurethane
— UP-100 Solvent Free Polyurea Elastomer Coating
— No.54HB High Build Fluoro Carbon Paint
The tested coating system is defined in accordance with NORSOK M-501.
The testing has been performed with basis in test requirements of NORSOK M-501 (for Coating system no. 1, for protection of Carbon steel with maximum operating temperature <120°C for Structural steel and Exteriors of equipment, vessels, piping and valves (not insulated)).
Coating system no. 1 is defined in NORSOK M-501, Surface preparation and protective coating, Rev. 6, February 2012, as having a zinc rich primer (DFT min. 60 µm), a minimum of 3 coats and a total DFT of min. 280 µm. Note that EP-116 shall be applied with DFT min. 60 µm.
For details on Coating system no. 1, please refer to NORSOK M-501, Rev. 6, February 2012.

Product Ratings

Not Available / To be Updated

Applicable Standards

Not Available / To be Updated