Rainboprime 973 (1x150 m) / Rainboprime 962 (1x150 m) / Rain…

Cathodic Protection & Protective Coating

Anticorrosive Marine Coatings

Rainboprime 973 (1x150 m) / Rainboprime 962 (1x150 m) / Rainbothane 751 (1x50 m)

Product Description

Rainboprime 973 (1x150 µm) / Rainboprime 962 (1x150 µm) / Rainbothane 751 (1x50 µm)
Description of the Coating system, tested on bare steel;
— No zinc rich primer specified/used
— Rainboprime 973 A two-pack anticorrosion primer based on epoxy resin
— Rainboprime 962 A two-pack anticorrosion primer based on epoxy resin
— Rainbothane 751 A two-pack aliphatic acrylic polyurethane finish
The tested coating system is not defined, and therefore not, in accordance with NORSOK M-501.
The testing has been performed with basis in test requirements of NORSOK M-501 (for Coating system no. 1, for protection of Carbon steel with maximum operating temperature <120°C for Structural steel and Exteriors of equipment, vessels, piping and valves (not insulated)), however, does not indicate that the coating system is accepted as an alternative of the system specified in NORSOK M-501. The use of the tested coating system to be evaluated in each individual case between contractual partners.
Coating system no. 1 is defined in NORSOK M-501, Surface preparation and protective coating, Rev. 6, February 2012, as having a zinc rich primer (DFT min. 60 µm), a minimum of 3 coats and a total DFT of min. 280 µm.
For details on Coating system no. 1, please refer to NORSOK M-501, Rev. 6, February 2012.

Product Ratings

Not Available / To be Updated

Applicable Standards

Not Available / To be Updated