RAINBOPRIME 801 (3x200 m), Anticorrosive Marine Coatings
Cathodic Protection & Protective Coating
Anticorrosive Marine Coatings
RAINBOPRIME 801 (3x200 m)
Product Description
RAINBOPRIME 801 (3x200 µm)
Description of the Coating system, tested on bare steel;
— RAINBOPRIME 801 Anti-corrosion primer based on epoxy resin
The tested coating system is defined in accordance with NORSOK M-501.
The testing has been performed with basis in test requirements of NORSOK M-501 (for Coating system no. 7A, for protection of carbon and stainless steel in the splash zone).
Coating system no. 7A is defined in NORSOK M-501, Surface preparation and protective coating, Rev. 6, February 2012, as two-component epoxy or polyester based coating, a minimum of 3 coats and a total DFT of min. 600 µm.
For details on Coating system no. 7A, please refer to NORSOK M-501, Rev. 6, February 2012.
Product Ratings
Not Available / To be Updated
Applicable Standards
Not Available / To be Updated