Sleev-it marine penetration sealing systems, Penetrations through bulkhead and deck
Piping System Components
Penetrations Through Bulkhead and Deck
Sleev-it marine penetration sealing systems
Product Description
Roxtec Sleev-it marine penetration sealing system is divided into three different product groups :, , Roxtec Sleev-it Fire Penetration Seal consist of an intumescent strip material inserted in an openable stainless steel casing, equipped with an openable flange, intended for bolted or spot welded installation onto steel divisions., , Roxtec Sleev-it Watertight penetration seal consist of an intumescent strip material inserted in a closed stainless steel casing, equipped with a closed flange with an EDPM rubber grommet, intended for fully welded installation onto steel divisions., , Roxtec Sleev-it Transition collar consist of an intumescent strip material inserted in an openable stainless steel housing, intended for protections of transitions between plastic pipe and steel pipe systems.
Product Ratings
Fire penetration Seal: Tested for air tightness up to 30 mbar for pipes with outer diameter 16- 160 mm diameter. | | Watertight penetration seal: Watertightness rating 1 bar and air tightness rating 0.5 bar for pipes with outer diameter 16- 110 mm. | | *Note penetrations in A-0, A-30 or A-15 bulkheads and decks must be insulated to A-60 standards since that was the configuration when the penetrations were fire tested*
Applicable Standards
SOLAS Ch. II-2, Reg. 9.3.1 (2014 Consolidated Edition), as amended
IMO Resolution A.754 (18)