RS PPS and RS PPS/S series (steel divisions), Penetrations through bulkhead and deck

Piping System Components

Penetrations Through Bulkhead and Deck

RS PPS and RS PPS/S series (steel divisions)

Product Description

Roxtec plastic pipe sealing system with multi diameter technology., , RS PPS 31-450 - Consisting of a steel sleeve, bolted or welded to a steel section. The sleeve is fitted at both ends with Roxtec RS seals (standard or EMC versions) including intumescent material in between., , RS PPS/S 31-150 - Consisting of a steel sleeve, bolted, welded or SLX-type sleeve attached through expansion, on to the steel sections. The sleeve is fitted with one single RS PPS/S seal with integrated intumescent material. Minimum thickness for steel sleeve is 1.5 mm.

Product Ratings

Fire Rating: A0, A15, A30, and A60 for bulkheads and decks. | RS PPS pressure tested for 6 bar watertightness and 4 bar gastightness. | RS PPS/S pressure tested for 6 bar watertightness and 3 bar gastightness. | A60 Steel bulkhead division (for watertight bulkhead division for Passenger Ships and Special Purpose Ships as per SOLAS II-1/13.2.3). | RS PPS/S 43-150. The transits are tested for watertightness with 2 bar test pressure for 60 minutes after an A60 fire test.

Applicable Standards

SOLAS (2014 Consolidated Edition ) Ch. II-2, Reg. 9.3.1, Ch. II-1, Part B-2, Reg. 13.2.3;
2010 Resolution MSC.307(88), 2010 FTP Code (2012 Edition), Annex 1 Part 3; IMO Resolution A.754 (18).