Pipelock, Penetrations through bulkhead and deck
fire Protection - Partitions & outfits
Penetrations Through Bulkhead and Deck
Pipelock
Product Description
“Pipelock” (25/55/82/110)
Composed of a 100 mm long flanged phenolic sleeve having an intumescent graphite inside. The sleeve is fixed to the steel plate by self-tapping screws or use the metal plates to tack-welded. The joint between penetration and pipe to be sealed with Fire Stop Sealant 3000. The penetrations are uninsulated.
When used in bulkheads/decks:
For penetration models Pipelock 110 and Pipelock 82 intumescent material is to be made of two layers, total thickness 8 mm.
For penetration models Pipelock 55 and Pipelock 25 intumescent material is to be made of one layer, total thickness 4 mm.
For penetration models Pipelock 55 and Pipelock 110 additional edge, rockwool insulation with dimension 45 mm x 100 mm (T x W) should be applied from unexposed side. The same apply to any penetration model if the gap between the pipe and the coaming is greater than 30 mm.
Product Ratings
Not Available / To be Updated
Applicable Standards
Not Available / To be Updated