LOADMASTER X5, Loading Computer System

Instrumentation and Automation

Loading Computer System

LOADMASTER X5

Product Description

Available Options of the Software:
Based on the stored characteristic data and stored3Dmodel and loading data given by the user, the following functions are performed onboard monohull vessels:
Hull Strength:
For prepared loading conditions;
1. Calculation of still water bending moment and shear force, including torsional moments, and control against limit values.
2. Correction of still water shear force for bulk carriers.
3. Check of longitudinal strength of the hull girder for flooded cargo holds (previous IACS UR S17).
4. Check of allowable mass in holds as function of draft
Stability:
For prepared loading conditions;
1. Calculation of draft, trim, righting levers (GZ)and metacentric height (GM)
2. Calculation and check of the intact stability criteria of 2008 IS Code Part A Ch.2.2 and 2.3
3. Calculation and check of compliance with pre-stored limit curves for intact and damage stability
4. Calculation and check according to the damage stability criteria of MARPOL 73/78 Annex I Regulation 28, IMO IBC Code Ch.2, and IMO IGC Code Ch.2
5. Calculation and check of the grain stability requirements of SOLAS-74 Reg. VI/Part C and MSC 23(59), (International Grain Code) including A.10.3

Product Ratings

Not Available / To be Updated

Applicable Standards

Not Available / To be Updated