CYBERMASTER 3D, Version 10.1,, Loading Computer System

Instrumentation and Automation

Loading Computer System

CYBERMASTER 3D, Version 10.1,

Product Description

Available Options of the Software:
Based on the stored characteristic data and stored 2D(*) and3D model and loading data given by the user, the
following functions are performed onboard monohull vessels:
Hull Strength:
For prepared loading conditions;
- Calculation of still water bending moment and shear force, and control against limit values.
Stability:
For prepared loading conditions;
- Calculation of draft, trim, righting levers (GZ) and metacentric height (GM)
- Calculation and check of the intact stability criteria of 2008 IS Code Part A Ch.2.2 and 2.3
- Calculation and check of compliance with pre-stored limit curves for intact and damage stability
- Calculation and check according to the damage stability criteria of MARPOL 73/78 Annex I Regulation 28,
IMO IBC Code Ch.2, and IMO IGC Code Ch.2
- Calculation and check of the grain stability requirements of SOLAS-74 Reg. VI/Part C and MSC
23(59), (International Grain Code) including A.10.3
- Calculation of damage stability of a real case flooding scenario, with manual user input of the
damage case.

Product Ratings

Not Available / To be Updated

Applicable Standards

Not Available / To be Updated