Emsys, Nox Analyser

Marine-Pollution Prevention Equipment

NOx Analyser

Emsys

Product Description

The Emsys Continuous Emission Monitoring Systems is a laser-driven single or multi-enclosure device that can continuously monitor emissions and provide automated analysis and data recordings from multiple smokestacks including engines, boilers, incinerators and GCUs to meet the Revised MARPOL Annex VI Maritime Emissions Regulations and optimize emissions performance in order to reduce vessels' NOx and SOx emissions, and their carbon footprint. Emsys allows operators of marine-fueled engines to continuously monitor, analyze, and record emissions from all installed engines and boilers. It analyzes and records Nitrogen Oxides (NO), Nitrogen Dioxides (NO2), Sulfur Dioxide (SO2), and Carbon Dioxide (CO2) and optionally Nitrogen Oxides (NO), Nitrogen Dioxides (NO2), Carbon monoxide (CO) and Methane (CH4)., and optionally particulate matter (PM). In addition, Global Positioning System (GPS) interface data tracks and records actual vessel position/time to support regulatory requirements in Emission Control Area (ECA) zones. Real-time graphical display allows simple compliance verification.

Product Ratings

Power Supply: 230VAC 50/60 Hz 14 A maximum; | Enclosure Rating: IP 52. | | Components: | Emsys(TM) Unit Enclosure, P/N: CEMS-UEA-01; | Particulate Matter (PM) Sensor, P/N: CEMS-SCA-01-03A/04A - Optional | PM Range: 0-1000 mg/m3; | Quantum Cascade Laser (QCL) Gas Sensor, P/N: CEMS-EV1-01-020; | NO Range 0-2000 ppm; | NO2 Range 0-300 ppm; | CO2 Range 0-15%; | SO2 Range 0-1750 ppm; | Emsys(TM) Heated Line Control Unit (HLCU), P/N: CEMS-HUA-01; | Emsys(TM) Sensor Control Unit (SCU), P/N: CEMS-SCU-01; | Generator Power Sensor VER A, P/N: CEMS-SCU-01-EXT-01; | Generator Power Sensor VER B, P/N: CEMS-SCU-01-EXT-02; | Generator Power Signal VER A, P/N: CEMS-SCU-01-EXT-03; | Generator Power Signal VER B, P/N: CEMS-SCU-01-EXT-04; | Charge Air Pressure Sensor VER A, P/N: CEMS-SCU-01-EXT-05; | Charge Air Pressure Sensor VER B, P/N: CEMS-SCU-01-EXT-06; | Charge Air Temperature Sensor VER A, P/N: CEMS-SCU-01-EXT-07; | Charge Air Temperature Sensor VER B, P/N: CEMS-SCU-01-EXT-08; | E3 Cycle Flywheel Speed Sensor VER A, P/N: CEMS-SCU-01-EXT-09; | E3 Cycle Flywheel Speed Sensor VER B, P/N: CEMS-SCU-01-EXT-10; | MAss Flow Transmitter Sensor VER A, P/N: CEMS-SCU-01-EXT-11; | Emsys Data Acquisition Unit, P/N: CEMS-DAU-02;

Applicable Standards

Revised MARPOL 73/78 Annex VI Regulation 13, Chapter 6.4 2008/2009 - 'Direct measurement and monitoring method (DMM)' and Appendix VI; Resolution MEPC. 184 (59) 2009 - Schemes A & B, SO2/CO2 ratio method for measurement of SOx emissions; MEPC/Circ.471 - 2005 Calculation of the CO2 emission index from operational data; 2014 IACS E10 -Test Nos. 3-11 & 13-18.

Reporting of totalized mass emissions (NOx, SOx, CO2 and PM) from marine diesel engines and marine boilers - to Manufacturers Standards utilizing the calculations contained in the NOx Technical Code (2008); Measurement of Particulate Matter (PM) from marine diesel engines and marine boilers - to Manufacturers standards.