Ballast ECORAY TDS C60-BW, LMS-Flex-SNT 60, TERC, EcoTouch 5…

Instrumentation and Automation

General Control System

Ballast ECORAY TDS C60-BW, LMS-Flex-SNT 60, TERC, EcoTouch 5, UV-Sensor SO20101

Product Description

Ecoray TDS 60 BW
Electronic ballast designed to operate two ECORAY® high power, high-performance, low pressure, UV-C 600W germicidal lamps
Operating voltage TNS net solidly grounded Wye
L , N , PE (Phase, Neutral, Grounding wire) 230V;1p;3w
207V – 253V
Operating frequency 50 / 60 Hz ±1 %
Current consumption max 7,0A
Power Rating 1250W
nominal current 5,5A @ 230V
Maximum power dissipation 70W
Power factor >0,99 @ 230V
Efficiency 94% max
inrush < 6,0A
Earth Leakage Current < 0,35mA
Input protection 8A quick-acting fuse on board 8A / FF / 500V / (UL)
Protection of Heating Circuits 3x 10A quick-acting SMD fuse on board: 10A / F / 125V / (UL)
Output voltage 118V
Output frequency 63 kHz
Lamp Two WEDCO ECORAY® 600W ELR60
Lamp cable length 5 - 25m
dischargetime < 10s
Lamp cable type SAB-Cable
LMS-Flex-SNT 60
Distribution of three phase power and control signals to 6 ECORAY® TDS 60 ballasts.
Operating voltage 480/277 V; 3p ; 5w or ( 400/230V; 3p; 5w European TN-S)
Operating frequency 50 / 60 Hz ±1 %
Current consumption max 18A / Phase
Input protection fan / LMS-bus 2A time-lag fuse on printed circuit board (2A/T/500V UL)
TERC
Electronic interface plate. She collects digital and similar input data and makes digital and simi- lar original data available
Operating Voltage 12 VDC from EcoTouch
Current Consumption Max. 0,8A
UV-Output 0/4-20mA
Power supply type wiper AC ( L, N, PE)
Input power wiper 230..277V ±10%, 50/60Hz
Fuse wiper 4A slow blow
EcoTouch 5
The EcoTouch is an integral part of the Lamp Managing System. It takes over the task of controlling and visualizing the components of a WEDECO UV system.The EcoTouch communicates with the other system components and exchanges commands, status information and measurement values via the LMS bus
Operating Voltage 230V...277V AC (6106993, 6108646)
24V DC (6111151)
Current Consumption max. 1000 mA
Battery CR1216 lithium coin cell, 3V
Display Graphics capable touch screen (240 x 128 Pixel)
Controls Soft keys on the touch screen
SO 20101
UV Sensor to monitor and control UV-C output at 254nmus
Measuring range [W/m²] 0.2 - 3000
Opening angle 160°
Accuracy +/- 3 %
Selectivity 240 – 290 nm > 95 %

Product Ratings

Not Available / To be Updated

Applicable Standards

Not Available / To be Updated