OceanDoctor Ballast Water Management System (OceanDoctor BWM…

Marine-Pollution Prevention Equipment

Ballast Water Management System (BWMS)

OceanDoctor Ballast Water Management System (OceanDoctor BWMS)

, HBS-50/150/250/350/500/650/750/800/1000/1300/1600/2000/2400/3000/3200/4000/5000

,

Product Description

The OceanDoctor BWMS uses a combination of filtration with a self-cleaning filter (50m) and disinfection with UV irradiation and photo-catalytic oxidation to produce the Active Substance OH-radical to treat the ballast water in uptake only. Due to the rapid decomposition of the hydroxyl radical used as Active Substance, there is no further treatment of the ballast water during de-ballasting, with the treated water being discharged directly from the ship., , Major components of the OceanDoctor BWMS include Filter, Photo-catalytic reaction unit (PC reaction unit), Control unit and Sampling facility., PC reaction unit is mainly composed of a reaction chamber, UV lamp assembly, photo-catalytic reaction film and a cleaner., Control unit is mainly composed of a UV power cabinet, a control cabinet, a remote control cabinet and monitor sensors.

Product Ratings

Flow rate: 50~5000 m3/h | - Filtration degree/grade: 0.05mm | - Design pressure: 0.6Mpa | - Rated UV dosage: 250 mJ/cm2; Operating UV dosage: 220 ~360mJ/cm2 | - Maximum water temperature 50 | - Enclosure rating for power panel and control panel: IP44 | - Power supply: Three-phase AC 440V/400V, 60Hz/50Hz

Applicable Standards

"Guidelines for approval of ballast water management systems (G8)" adopted by IMO resolution MEPC.174 (58) on 10 October 2008.

"Procedure for Approval of Ballast Water Management systems that Make Use of Active Substances (G9)" adopted by IMO resolution MEPC. 169(57) on 4 April 2008.