Purimar system
, SP-25/50/100/150/200/250/300/350/400/450/50…

Marine-Pollution Prevention Equipment

Ballast Water Management System (BWMS)

Purimar system
, SP-25/50/100/150/200/250/300/350/400/450/500/550/600/650/700/800 /900/1000
, SP-25(EX)/50(EX)/100(EX)/150(EX)/200(EX)/250(EX)/300(EX)/350(EX)/400(EX)/450(EX)/500(EX)/550(EX)/600(EX)/650(EX)/700(EX)/800(EX) /900(EX)/1000(EX)

Product Description

The Purimar system has been designed and manufactured to meet IMO's requirements for ballast water management systems. At ballasting, the ballast water treatment process performed by the Purimar system comprises of two main unit operations: mechanical separation (filtering) and disinfection (electrolysis-based chlorination). At de-ballasting, neutralization unit decreases the Total Residual Oxidants (TRO) concentration if required before the ballast water discharge.

Product Ratings

[1] Treatment Rated Capacity (Flow Rate) : 250 m3/h ~ 10,000 m3/h | [2] Operation Performance : | (a) TRO (Total Residual Oxidants) Concentration : Less than 3.0 mg/L | (b) Neutralization : Less than TRO 0.1 mg/L after neutralization before discharge | [3] Neutralization Agent : Sodium Thiosulfate | [4] Salinity Condition : Electrolyzer feed salinity > 10 PSU (Under 10 PSU, the reserved salt water or sea water should be used) | [5] Measured Range of Sensor : TRO (Total Residual Oxidants) : 0~10 ppm | [6] Allowable Operating Ambient Temperature : 0 ~ 55 Degree C | [7] Electric Power : AC 220/440Volts, 3 Phase

Applicable Standards

IMO Res. MEPC.174(58) Adopted on 10 October 2008
IMO Res. MEPC.169(57) Adopted on 04 April 2008

N/A

N/A