B-WACS, Control/Monitoring System and components

Instrumentation and Automation

Control/Monitoring System and Components

B-WACS

Product Description

B-WACS consists of the following:, , a) Signal Capture Unit (SCU) is installed on the low part of the crosshead guide and measures relative position between each guide-shoe and the proximity sensor at BDC (Bottom Dead Center) whenever engine operates., , b) Signal Analysis Unit (SAU) is installed inside the engine control console. The measured data is analyzed to determine bearing status. Analyzed data can be stored up to 5 years for investigating long term status of bearing., , c) Data Monitoring Unit (DMU) is mounted on the engine control console and offers operator user interface so that operator can check wear condition of bearings and see the final bearing wear value and wear trend, but DMU is not covered by this certificate.

Product Ratings

AA. Control Module for Signal Capture Unit (SCU) | a) Control voltage: 15 to 34 VDC | b) Current consumption: 150 mA (max. 200 mA) at 24 VDC | c) RS232 data format: 115, 200, N, 8, 1 | d) Protection degree: IP67 | | BB. Inductive Proximity Sensor for Signal Capture Unit (SCU) | a) Input voltage: 15 to 30 VDC | b) Current consumption: 4 to 20 mA | c) Sensing range: 0 ~ 10 mm | | CC. Resistance Temperature Detector Sensor (RTDS) for Signal Capture Unit (SCU) | a) Sensor type: PT100, Class B, 3 wires | b) Protection degree: IP67 | | DD. Signal Analysis Unit (SAU) | a) Input voltage: 15 to 34 VDC | b) Current consumption: 150 mA (max. 200 mA) at 24 VDC | c) Internal memory: 16 Gbytes | d) RS232 data format: 115, 200, N, 8, 1 | e) Enclosure: IP67

Applicable Standards

Not Available / To be Updated