UG25+, P3, Governor ; UG25+, P3, Actuator; UG25+, 31ft lb P3…

Machinery Components

Governor Control System

UG25+, P3, Governor ; UG25+, P3, Actuator; UG25+, 31ft lb P3, Governor; UG25+, 31ft lb P3, Actuator.

Product Description

UG25+& Versions governor is a microprocessor controlled, mechanical-hydraulic amplified governor for controlling conventional Diesel Engines with Fuel Rack. , It requires the drive power from the drive-shaft to provide internal oil pressure and a 24Vac electrical power supply. , The UG25+ incorporates a user interface (UI) panel mounted directly on the device that gives the end-user the ability to adjust droop, gain, load limit and engine speed locally at the governor. Those functions can also be controlled through the service tool for use with the L-series governor.

Product Ratings

Power Supply: 18 to 32 VDC; Power Consumption: Reverse polarity protection; 32 W max. | Torque/Work Output (minimum): | Standard Version: 45.4 N*m (33.5 ib-ft) torque, 32.9 J (24.3 ft-lb) of work over 42 degree (0.625 inch diameter terminal shaft) | Increased Output: 55.5 N-m (40.9 ib-ft) torque; 40.2 J (29.6 ft-lb) of work over 42 degree (0.75 inch diameter terminal shaft) | Max. Continuous Speed: 1700 rpm (gov. shaft) Max (small pump); 1200 rpm (gov. shaft) Max (large pump) | Internal Hydraulic Pressure: 1034 kPa (150 psi) | Ambient Operating Temperature: 0 C to 55 C (32 F to 131 F) | Governor Case Temperature: 100 C (212 F) maximum | Enclosure Rating: IP44 Rating on overall Assembly and IP 65 Rating on the Interface Panel

Applicable Standards

IEC 60529 (2001)