PAH Sensor enviroFlu-HC 500, enviroFlu-HC 5000
Instrumentation and Automation
Miscellaneous Transmitters
PAH Sensor enviroFlu-HC 500, enviroFlu-HC 5000
Product Description
UV-fluorometer for detection of PAH (Polycyclic Aromatic Hydrocarbons) in water.
Power supply: 12…24VDC (+/-10%)
Interface, analog output: 4…20mA
Connector: M12 industrial connector with 5m fixed mounted cable
Material: Measuring head: POM black with fused silica
Housing: Stainless steel 1.4571
Hardware version: V3.0
Software version: V1.80
The measuring range is depending on the washwater flow rate and can be adjusted in accordance with the requirements of Resolution MEPC.259(68) adopted on 15. May 2015 “2015 Guidelines for exhaust gas cleaning systems - Section 10 “Washwater”.
The enviroFlu is intended for installation on-board vessels operating an exhaust gas cleaning system (EGCS). The enviroFlu is found to be in compliance with the requirements of Resolution MEPC.259(68) - 2015 Guidelines for exhaust gas cleaning adopted on 15 May 2015, Chapter 10, “Washwater”.
enviroFlu-HC 500/5000 meet the following requirements:
- Principle of detection for PAH PHE Eq (MEPC.259(68), 10.1.3.3)
- Measurement range for PAH PHE Eq (MEPC.259(68), 10.1.3.3)
- Turbidity influences on PAH PHE Eq (MEPC.259(68), 10.2.3)
The operating temperature is from 5°C to 55°C, whereas the specified detection limits are only valid in the temperature range between 5°C to 40°C.
Product Ratings
Not Available / To be Updated
Applicable Standards
Not Available / To be Updated