P-718-TS-6-M8, Fastening System
Machinery Components
Fastening System
316STEEL CO.,LTD, Gimhae-Si, Republic of Korea
Gimhae-Si, Republic Of Korea
P-718-TS-6-M8
Product Description
The Self Tapping Threaded Stud (P-718-TS-6-M8) is a grating fastener used on Marine Vessels, Offshore Units & Structures and has an easier tightening method and strong fastening ability.,
Product Ratings
1. Tensile Load Tested with 6t @ Temp. 24 ~ 25 C, Humidity 48 ~ 50 % R.H : 19.02 kN | 2. Tensile Load Tested with 9t @ Temp. 24 ~ 25 C, Humidity 48 ~ 50 % R.H : 21.46 kN | 3. Low Temp. (-50 C) Tensile Load Tested @ Temp. 25 ~ 26 C, Humidity 47 ~ 50 % R.H : 24.04 kN | 4. Elevated Temp. Tensile Load Tested @ Temp. 24 ~ 25 C, Humidity 47 ~ 50 % R.H : 22.89 kN for 200 C, 22.69 kN for 400 C & 19.22 kN for 600 C, | 5. Shear Load Tested with 6t @ Temp. 24 ~ 25 C, Humidity 48 ~ 50 % R.H : 18.04 kN | 6. Shear Load Tested with 9t @ Temp. 24 ~ 25 C, Humidity 48 ~ 50 % R.H : 18.44 kN | 7. Simulated Seismic Tension Tested with 6t @ Temp. 25 ~ 26 C, Humidity 50 ~ 51 % R.H : 19.1 kN | 8. Simulated Seismic Shear Tested with 6t @ Temp. 24 ~ 25 C, Humidity 50 ~ 51 % R.H : 17.96 kN | 9. Beam Vibration Tested @ Temp. 24 ~ 25 C, Humidity 50 ~ 51 % R.H : 22.18 kN | 10. Neutral Salt Spray Tested @ Temp. 20 ~ 22 C, Humidity 30 ~ 40 % R.H : No Defect | | -. Recommended Tension Load: 3.2 kN (Safety Factor >=3 as per Technical Data in Manufacturer's Specification) | -. Recommended Shear Load: 3.2 kN (Safety Factor >=3 as per Technical Data in Manufacturer's Specification) | -. Recommended Moment: 8.0 Nm as per Technical Data in Manufacturer's Specification. | -. Service Temperature: -40 to 100 Celsius as per Technical Data in Manufacturer's Specification. | | Conditions for Recommended Loads: | -. Minimum Edge Distance: >= 6.0 mm, Spacing >= 18.0 mm | -. Effect of base metal vibration and stress should be considered. | -. Multiple fastening should be provided. | -. When eccentric loading exists, moments caused by off-center loading should be considered.
Applicable Standards
ASTM E1190 & ASTM B117
Manufacturer's Standard (Self Tapping Studs Specification(Rev3))