"Marine Wrap" - Plastic Pipe Seal, Bulkhead and Deck Penetration Seals

Seals, Glands & gaskets

Bulkhead and Deck Penetration Seals

"Marine Wrap" - Plastic Pipe Seal

Product Description

"Marine Wrap" is a graphite intumescent wrapping material applied around plastic pipes and fastened with 2 hose clamps. The hose clamps are screwed around a graphite intumescent wrapping material on each side of the separating bulkhead and both under the separating deck. The intumescent material expands when affected by fire and seals the gap between the pipe and the penetrated opening. , As heat increases, the surface layer of the intumescent material forms a fire-resistant char preventing the passage of flame, smoke and gases. , The joint between the pipe and the "Marine Wrap" is sealed with Marine Flex to prevent the passage of cold smoke or gas.

Product Ratings

Fire Rating: A0, A15, A30 & A60 class divisions | Activating Temperature: Approx. 120C | "Marine Wrap" Length: variuos depending on plastic pipe sizes | "Marine Wrap" Width: 150 mm for all plastic pipe sizes

Applicable Standards

International Convention for the Safety of Life at Sea (SOLAS), (Consolidated Edition 2014), as amended;
IMO Resolution A.754(18) - Recommendation on Fire Resistance Tests for "A", "B" and "F" Class Divisions in accordance with IMO 2010 FTP Code Part 3 (Edition 2012).