IZ-01 (1x75 m) / EP-999H (1x150 m) / UP-450 (1x60 m)
Cathodic Protection & Protective Coating
Anticorrosive Marine Coatings
IZ-01 (1x75 m) / EP-999H (1x150 m) / UP-450 (1x60 m)
Product Description
IZ-01 (1x75 µm) / EP-999H (1x150 µm) / UP-450 (1x60 µm)
Description of the coating system, tested on bare steel;
— IZ-01 Zinc Rich Primer
— EP-999H High Solids Epoxy Coating
— UP-450 Polyurethane Coating
The tested coating system is defined in accordance with NORSOK M-501.
The testing has been performed with basis in test requirements of NORSOK M-501 (for Coating system no. 1, for protection of Carbon steel with maximum operating temperature <120°C for Structural steel and Exteriors of equipment, vessels, piping and valves (not insulated)).
Coating system no. 1 is defined in NORSOK M-501, Surface preparation and protective coating, Rev. 6, February 2012, as having a zinc rich primer (DFT min. 60 µm), a minimum of 3 coats and a total DFT of min. 280 µm.
For details on Coating system no. 1, please refer to NORSOK M-501, Rev. 6, February 2012.
Product Ratings
Not Available / To be Updated
Applicable Standards
Not Available / To be Updated