ISR Cable Fittings, Cable Glands

Electric Cables and Accessories

<p>Shipboard Electric Cables and Accessories</p> /url1

Cable Glands

ISR Cable Fittings

Product Description

ISR Cable Gland Catalogue Nos.: , NPT - ISR050-053, ISR050-062, ISR075-062, ISR075-082, ISR100-102, ISR125-122, ISR125-137, ISR150-156, ISR200-179, ISR200-206 (SS suffix for Stainless Steel material), Metric - ISRM20-13, ISRM20-15, ISRM25-15, ISRM25-20, ISRM32-26, ISRM40-31, ISRM40-35, ISRM50-39, ISRM63-45, ISRM63-52 (SS suffix for Stainless Steel material), , Cable glands are designed to provide an introduction of a single circular cable into an increased safety (Ex e) and/or a dust ignition protected (Ex ta) enclosure. Cable gland shell consists of a threaded aluminum or stainless steel gland body and a threaded aluminum or stainless steel nut.

Product Ratings

Thread sizes - 1/2 to 2 in. NPT | Hazardous Area Rating: | Ex e IIC Gb, Ex ta IIIC Da, Ta = -50 C to +110 C, IP66 | Class 1, Division 2, Groups A, B, C and D; Class II, Division 1, Groups E, F, and G; Class III, Division 1; Type 4X (CSA Certificate)

Applicable Standards

IEC 60079-0: 2011 - Explosive Atmospheres - Part 0. General requirements, Ed. 6.0
IEC 60079-31:2013 - Explosive Atmospheres - Part 31. Equipment dust ignition protection by enclosure "t", Ed. 2
IEC 60079-7:2006-07 - Explosive Atmospheres - Part 7. Equipment protection by increased safety "e", Ed. 4

CAN/CSA C22.2 No. 0-10 -General requirements - Canadian electrical code, part II, 2010
C22.2 NO. 25-1966 (R2014) - Enclosures for Use in Class II Groups E, F and G Hazardous Locations, 2014
CAN/CSA C22.2 NO. 60079-0:11 - Explosive atmospheres - Part 0: Equipment - General requirements, 2011
CAN/CSA C22.2 NO. 60079-7:12 - Explosive atmospheres - Part 7: Equipment protection by increased safety "e", 2012
CAN/CSA C22.2 NO. 60079-31:12 - Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t", 2012
CAN/CSA C22.2 NO. 18.3-12 - Conduit, Tubing, and Cable Fittings, 2014
CAN/CSA C22.2 NO. 94-M91 - Special Purpose Enclosures, 2011
ANSI/UL 514B - Conduit, Tubing and Cable Fittings, 2014