EGC Water Analyzer, Control/Monitoring System and components

Instrumentation and Automation

Control/Monitoring System and Components

EGC Water Analyzer

Product Description

The EGC Water Analyzer cabinet consists of the following main sub-components:
-Enclosure Rittal KS1469.500 with Plexiglas window, IP56
-Monitoring unit TriBox3 providing with HMI display for measurements data and configuration
-enviroFlu Polycyclic Aromatic Hydrocarbon (PAH) sensor
-TTurb Turbidity sensor
-TpH-D ph sensor
-Flow sensor, magnetic-inductive, Bürkert type 8041
-Flow cells for sensor mounting
-Power supply connection- and switch-box
-Terminals for Ethernet connectivity (Modbus TCP/IP)
-Terminals for analogue outputs (6 x 4...20mA)
-Wash water inlet connector with pressure reducer
-Wash water outlet with ball valve; Wash water sample taking with ball valve
Power supply: 230VAC, 50Hz (Range: 100-240VAC, 50-60Hz).
Range of Application:
The “TriOS EGC Water Analyzer” is intended for installation on-board vessels operating an exhaust gas cleaning system (EGCS).
The TriOS EGC Water Analyzer is found to be in compliance with the requirements of Resolution MEPC.259(68) - 2015 Guidelines for exhaust gas cleaning adopted on 15 May 2015, Chapter 10 “Washwater”.
“TriOS EGC Water Analyzer” meets the following requirements:
- Principle of detection for PAHPHE Eq (MEPC.259(68), 10.1.3.3)
- Measurement range for PAHPHE Eq (MEPC.259(68), 10.1.3.3)
- Turbidity influences on PAHPHE Eq (MEPC.259(68), 10.2.3)
- Principle of detection for pH (MEPC.259(68), 10.2.2)
- Resolution for pH (MEPC.259(68), 10.2.2)
- Temperature compensation for pH (MEPC.259(68), 10.2.2)
- Principle of detection for Turbidity (MEPC.259(68), 10.2.5)
The PAH values from enviroFlu are corrected on the controller TriBox3 with the measured values of TTurb. The original PAH values and the turbidity corrected PAH values are displayed and stored on the TriBox3.

Product Ratings

Not Available / To be Updated

Applicable Standards

Not Available / To be Updated