DDPS-0, Pressure Indicator, Gauges and Transmitters

Instrumentation and Automation

Pressure Indicator, Gauges and Transmitters

DDPS-0

Product Description

DDPS-0 is composed of pressure sensor and transducer with attached electric cable. Transducer is installed on indicator valve of each cylinder cover and measured signal is converted into a current signal by charge-amplifier.

Product Ratings

a) Input voltage: 24VDC | b) Reset voltage: 15 VDC | c) Output signal: 5~21 mA (adjustable) | d) Output impedance: 300 ohm | e) Measurement principle: Piezoelectric transducer crystal | f) Measuring range: 0~250 bar | g) Overload: 400 bar | h) Sensitivity: 0.064 mA/bar | i) Accuracy: +/- 0.5% F.S | j) Operating temperature for transducer: -10 ~ 350 degree C | k) Operating temperature for charge-amplifier: 0~75 degree C | l) Tightening torque: 15 Nm | m) 4 meter coaxial low noise cable with flame retardant tubing | n) Enclosure: IP44

Applicable Standards

IACS UR E10 (2014)