Ant-8C-Marine, AW_marine, Measurement Converters

Instrumentation and Automation

Measurement Converters

Ant-8C-Marine, AW_marine

Product Description

Torque Measuring Transducer based on Sensortelemetrie
Pick-up: Ant-8C-Marine
Receiver Unit: AW_marine
· The rotating torque measuring flange works with strain gage bridges which are connected like a Wheatstone bridge.
· The torque measuring flange measures static and dynamic torque on rotating and stationary shafts.
· The analog measuring signal is amplified and modulated to high frequency.
· The torque measuring signal and energy are transmitted contact-free.
· The measuring signal is transmitted inductively based on Sensortelemetrie
· In the evaluation unit the digitized torque signal is transformed into an analog current output signal of 4 to 20 mA.
Technical datas:
- HF frequency: 6.78 MHz
- HF power: 5 W
- Number of channels: 1
- Resolution: 16 Bit with 16 Bit CRC
- Data interface: USB type mini A
- Analog output current: 4 to +20 mA
- Amplifier adjustment (fine ±15%) at the evaluation unit
- Zero point adjustment (±20%) at the evaluation unit
- Zero point drift: ±0.02% / °C
- Bandwidth: 0 to 0.5 / 10/ 1 kHz (-3 dB)
- Linearity: <0.1%
- Input: Remote shunt calibration (active low, < 0,9V / pull up 2mA)
- Temperature range evaluation unit: -25 to +70°C
- Power supply: 18 - 32 V DC , (max. 1.2 A , 2 A internally fused)
- Protection class: IP65
- Sensitivity range: 0.05 to 12 mV / V, factory setting

Product Ratings

Not Available / To be Updated

Applicable Standards

Not Available / To be Updated