ULTRA-SEP US250, ULTRA-SEP US500, US500C, US500G, ULTRA-SEP …

Marine-Pollution Prevention Equipment

5 ppm Bilge Water Separator

ULTRA-SEP US250, ULTRA-SEP US500, US500C, US500G, ULTRA-SEP US1000, US1000C, US1000G, ULTRA-SEP US2000, ULTRA-SEP US3000, ULTRA-SEP US5000, ULTRA-SEP US7500, ULTRA-SEP US10000

Product Description

The 5 ppm Bilge Water Separation System Type ‘ULTRA-SEP’ is intended for installation onboard ships or
other marine units to reduce the oil content in bilge water to less than 5 ppm.
The ‘ULTRA-SEP’ system uses a duel stage separation process: i) incoming bilge water passes through a
‘HELI-SEP’ unit consisting of coalescers and a polishing pack, ii) the feed pump then pressurizes the
partly treated bilge water for processing through a process filter. Then, the pressure and flow rate are
adjusted by the process pump which drives the partly treated water into the ‘SPIR-O-LATOR’ membrane
units at high velocity. The output is processed water with oil content less than 5ppm.
The waste oil from the ‘HELI-SEP’ unit is held in an oil separation chamber which is discharged
occasionally through an oil discharge line. The concentrate with rejected oils and waste from the ‘SPIR O-LATER’ units is recirculated back to the inlet of the process filter for reprocessing. A small proportion
of this recirculate is continuously bled off to the bilge/bilge water holding tank.

Product Ratings

Not Available / To be Updated

Applicable Standards

Not Available / To be Updated