Temperature Field Transmitter iTEMP TMT162, RTD thermometer …

Instrumentation and Automation

Temperature Sensors, Transducer and Indicators

Temperature Field Transmitter iTEMP TMT162, RTD thermometer Omnigrad S TMT162R

Product Description

TMT162: Electronic monitoring, conversion and display of input signals for temperature measurement. Configurable via handheld module "HART® Communicator FC375/475" or software FieldCare/DeviceCare (see BA01381T chapter 6.4).
Power supply: rated 24V DC (11 ... 42V DC, Ex 11 ... 30V DC)
Inputs: (2x) RTD (temperature)
TC (voltage)
Ohm (resistance)
Output :4 ... 20mA / 20 ... 4mA
Analogue
2-wire
HART® signal (HART® communication via transmitter power supply, e.g. RN221N)
Display: LC-display, illuminated, rotable in 90°
Mounting: remote mounting using mounting bracket
Housing material : Aluminium
stainless steel
Cable entries : 2 x NPT ½
2 x M20x1.5
Firmware version: 3.xx.xx
TMT162R: The TMT162R RTD consists of the iTEMP® TMT162 HART field transmitter and a sensor assembly which is mechanical comparable to Omnigrad S TR66/63.
Measuring temperature: up to 600°C
Supply voltage rated 24V DC (11 ... 42V DC) for HART communication
Communication: Pt100
HART
Housing material: Aluminium
stainless steel (316L)
A thermowell must be used which fulfills following requirements:
Extension : up to 100mm
Total length: up to 1100mm
Immersion length: up to 1000mm
Diameter tip : > 10mm up to 750mm Immersion length
> 18mm up to 1000mm Immersion length
Material : Stainless steel

Product Ratings

Not Available / To be Updated

Applicable Standards

Not Available / To be Updated