Cubic Modulsystem, Switchboard and Components
Switchgear and Components
Switchboard and Components
Cubic Modulsystem
Product Description
The Cubic Modulsystem is a switchboard enclosure intended for use with busbar types S2000 and S7000 to be utilised in main and emergency switchboards, distribution boards, motor control centres., , The design of the modular system is based on a system constructed of similar parts, each with dimensions, which are a multiple of 192mm. The supporting structure is made of shaped steel and is assembled by means of moulded corners and brackets of various kinds. Three sides are fitted with cover plates, the fourth side - front - is typically provided with doors, withdrawable units and/or removable cover plates. The material is primarily electro galvanized or iron phosphate steel plate treated with powder coating. , The construction parts of the ASSEMBLY can be made completely or partly as fixed parts, removable parts or as withdrawable parts. , All systems can be used as main and distribution busbars. The systems can be directly connected to each other with standard components and can be fitted vertically as well as horizontally. The horizontal busbars may be placed at choice at the top of the section, at the bottom or in-between sections. ,
Product Ratings
Rated Frequency: 50/60 Hz; | Rated Insulation Voltage: up to 1000V; | Rated Operational Voltage: up to 1000V; | Rated Current, Busbar maximum: 6000A, Configuration maximum: 6300A; | Rated Peak withstand Current Ipk : 264 kA; | Degree of protection: Up to IP54
Applicable Standards
IEC 61439-1:2011; IEC 61439-2:2011;
Clauses: 10.2, 10.3, 10.4, 10.5, 10.7, 10.8, 10.9, 10.10, 10.11, 10.12, 10.13;